a pastebin project

Kaloz

  1. variable_init:
  2. 80200000
  3. 80C00000
  4. 80E00000
  5. 80805004
  6. 001DDDD3
  7.  
  8. Uncompressing Linux...
  9. byte count = 00000001 byte val = 0000001F
  10. byte count = 00000002 byte val = 0000008B
  11. byte count = 00000003 byte val = 00000008
  12. byte count = 00000004 byte val = 00000000
  13. byte count = 00000005 byte val = 000000AF
  14. byte count = 00000006 byte val = 0000007C
  15. byte count = 00000007 byte val = 00000013
  16. byte count = 00000008 byte val = 0000003F
  17. byte count = 00000009 byte val = 00000002
  18. byte count = 0000000A byte val = 00000003
  19. byte count = 0000000B byte val = 000000EC
  20. byte count = 0000000C byte val = 0000007D
  21. byte count = 0000000D byte val = 0000000D
  22. byte count = 0000000E byte val = 00000070
  23. byte count = 0000000F byte val = 0000005C
  24. byte count = 00000010 byte val = 00000057
  25. byte count = 00000011 byte val = 00000095
  26. byte count = 00000012 byte val = 000000E6
  27. byte count = 00000013 byte val = 00000079
  28. byte count = 00000014 byte val = 0000003F
  29. byte count = 00000015 byte val = 00000092
  30. byte count = 00000016 byte val = 0000009E
  31. byte count = 00000017 byte val = 000000EC
  32. byte count = 00000018 byte val = 00000026
  33. byte count = 00000019 byte val = 00000079
  34. byte count = 0000001A byte val = 00000092
  35. byte count = 0000001B byte val = 000000DB
  36. byte count = 0000001C byte val = 00000076
  37. byte count = 0000001D byte val = 0000003B
  38. byte count = 0000001E byte val = 00000051
  39. byte count = 0000001F byte val = 000000EC
  40. byte count = 00000020 byte val = 0000006E
  41. Ok, booting the kernel.
  42. 00000000
  43. 00000000
  44. 00000000
  45. 00000000
  46. prom.c:RAM_FIRST 400 _ftext 200000 _end 54dfd0
  47. CPU revision is: 00018009
  48. Primary instruction cache 16kb, linesize 16 bytes (4 ways)
  49. Primary data cache 16kb, linesize 16 bytes (4 ways)
  50. Linux version 2.4.18-mips (root@localhost.localdomain) (gcc version 2.95.4 20010
  51. 319 (prerelease)) #20 Tue Jul 15 12:01:32 CST 2003
  52. PCI: Initializing PCI
  53. Determined physical RAM map:
  54.  memory: 04000000 @ 00000000 (usable)
  55. Initial ramdisk at: 0x80410000 (1208468 bytes)
  56. On node 0 totalpages: 16384
  57. zone(0): 16384 pages.
  58. zone(1): 0 pages.
  59. zone(2): 0 pages.
  60. Kernel command line: ip=192.168.1.3:192.168.1.1::netmask::eth0
  61.  
  62. calculating r4koff... 000f4240(1000000)
  63. CPU frequency 200.00 MHz
  64. Calibrating delay loop... 199.88 BogoMIPS
  65. Memory: 59068k/65536k available (1845k kernel code, 6468k reserved, 1352k data,
  66. 80k init, 0k highmem)
  67. Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
  68. Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
  69. Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
  70. Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
  71. Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
  72. Checking for 'wait' instruction...  unavailable.
  73. POSIX conformance testing by UNIFIX
  74. Autoconfig PCI channel 0x8040f84c
  75. Scanning bus 00, I/O 0x18800000:0x18900000, Mem 0x50000000:0x60000000
  76. Linux NET4.0 for Linux 2.4
  77. Based upon Swansea University Computer Society NET3.039
  78. Initializing RT netlink socket
  79. Starting kswapd
  80. JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
  81.  AB.
  82. Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
  83. abled
  84. ttyS00 at 0xb8050000x (irq = 39) is a 16550A
  85. ttyS01 at 0xb8050020x (irq = 42) is a 16550A
  86. block: 128 slots per queue, batch=32
  87. RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
  88. PPP generic driver version 2.4.1
  89. PPP Deflate Compression module registered
  90. PPP BSD Compression module registered
  91. eth0: RC32438 ethernet0 found at 0x18058000
  92. eth0: HW Address 08:00:06:05:40:01
  93. eth0: Rx IRQ 25, Tx IRQ 26
  94. eth1: RC32438 ethernet1 found at 0x18060000
  95. eth1: HW Address 08:00:06:05:50:01
  96. eth1: Rx IRQ 27, Tx IRQ 28
  97. hgrd flash device: 400000 at 1fc00000
  98.  Amd/Fujitsu Extended Query Table v1.3 at 0x0040
  99. HGRD MTD map: Swapping erase regions for broken CFI table.
  100. number of CFI chips: 1
  101. cfi_cmdset_0002: Disabling fast programming due to code brokenness.
  102. Creating 3 MTD partitions on "HGRD MTD map":
  103. 0x00000000-0x00200000 : "kernel"
  104. 0x00380000-0x00400000 : "storage"
  105. 0x00200000-0x00380000 : "apps"
  106. NET4: Linux TCP/IP 1.0 for NET4.0
  107. IP Protocols: ICMP, UDP, TCP, IGMP
  108. IP: routing cache hash table of 512 buckets, 4Kbytes
  109. TCP: Hash tables configured (established 4096 bind 4096)
  110. IP-Config: Device `eth0
  111. ' not found.
  112. ip_conntrack (512 buckets, 4096 max)
  113. ip_tables: (C) 2000-2002 Netfilter core team
  114. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  115. NET4: Ethernet Bridge 008 for NET4.0
  116. RAMDISK: Compressed image found at block 0
  117. Freeing initrd memory: 1180k freed
  118. VFS: Mounted root (ext2 filesystem).
  119. stubbed prom_free_prom_memory()
  120. Freeing unused kernel memory: 80k freed
  121. Initializing system environment
  122. Starting system logging daemon ...
  123. Setting up file systems ...
  124. Setting up /tmp directory ...
  125. Setting up FLASH storage partition ...
  126. watch dog init
  127. Setting up Ethernet port MAC Address
  128. Setting up loopback device ...
  129. Setting up LAN side bridge ...
  130. ath_pci: No devices found, driver not installed.
  131. device eth0 entered promiscuous mode
  132. apbr0: port 1(eth0) entering listening state
  133. apbr0: port 1(eth0) entering learning state
  134. apbr0: port 1(eth0) entering forwarding state
  135. apbr0: topology change detected, propagating
  136. Configuring LAN device ...          OK
  137. Starting network filter engine ...  OK
  138. Configuring 802.11a device ...      NOT PRESENT
  139. Configuring 802.11g device ...      NOT PRESENT
  140. Starting HTTPD server ...           OK
  141. Starting 802.1X Authenticator  ...  DISABLED
  142. Starting SNMP server ...            OK
  143. Starting DHCP server ...            OK
  144. Starting TELNETD server ...         OK
  145. Initialization has completed
  146. ************************************************************************
  147. *                           802.11 a+g AP                              *
  148. ************************************************************************
  149.  
  150. Username: root
  151. Password:
  152. Type 'help' for more information.
  153. cmd>shell
  154.  
  155.  
  156. BusyBox v0.60.5 (2003.07.11-13:47+0000) Built-in shell (ash)
  157. Enter 'help' for a list of built-in commands.
  158.  
  159. # uname -a
  160. uname: No such file or directory
  161. # cat /proc/version
  162. Linux version 2.4.18-mips (root@localhost.localdomain) (gcc version 2.95.4 20010
  163. 319 (prerelease)) #20 Tue Jul 15 12:01:32 CST 2003
  164. # cat /proc/pci
  165. PCI devices found:
  166.   Bus  0, device   0, function  0:
  167.     Class 0000: PCI device 111d:0207 (rev 0).
  168.       IRQ 1.
  169.       Master Capable.  Latency=60.  Min Gnt=8.Max Lat=56.
  170.       Prefetchable 32 bit memory at 0x0 [0x7ffffff].
  171.       I/O at 0x18800000 [0x187fffff].
  172.       I/O at 0x18000000 [0x17ffffff].
  173. # free
  174.               total         used         free       shared      buffers
  175.   Mem:        60332        27200        33132            0          344
  176.  Swap:            0            0            0
  177. Total:        60332        27200        33132
  178. #

advertising

Create a Paste

Please enter your new post below (or upload a file instead):





Please note that information posted here will not expire by default. If you want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords.